BCD Regulator Set Zeepro Scubatechnical V2.0 Alu + XTONE Diaphragm Yoke XTEC Adj + Single Gauge 52mm
BCD REGULATOR SET ZEEPRO SCUBATECHNICAL V2.0 ALUMINIUM + XTONE DIAPHRAGM XTEC ADJ + SINGLE GAUGE 52MM
BCD REGULATOR SET ZEEPRO SCUBATECHNICAL V2.0 ALUMINIUM + XTONE DIAPHRAGM XTEC ADJ + SINGLE GAUGE 52MM
BCD Zeepro Scubatechnical V2.0
Suitable for technical diving. Made out of robust and durable materials for maximum resistance to punctures and abrasions. Totally adjustable, affords unparalleled custom fit for every individual; uncluttered chest area delivers unrestricted ovement for the arms and shoulders. Less BC results in reduced water displacement, consequently decreasing the amount of weight needed, making the dive more enjoyable and safer. Material :- 1680D nylon non-fade outer bag .
- 1000D bladder material,solution dye.
- YKK zipper on bladder.
- Aluminium backplate
- Streamlined, prevents unnecessary drag and minimizes swimming effort.
- Perfect fit for all divers and diving systems.
- Storage pack provides storage for alternate lift and signaling devices.
- Rear over-pressure valve, makes it effortless to vent gas during the dive.
- Small toggle on over-pressure valve makes it easy to locate, even with thick coldwater gloves.
- Aluminium back-plate and Stainless steel D-ring.
- Circular wing design almost completely eliminates gas being trapped on either side of the wing.
- Easily able bladder.
- Lift Capacity: 30lb (DT 30)
- Crotch strap webbing system
- Shoulder pad on harness
- Backplate pad cover
- Complete power inflator Bcd K-type (16 inch)
- Trim weight pocket 2kg with buckle 1 pair)
1ST Stage Zeepro XTONE Diaphragm Balance 5th Port
Zeepro's XTONE the balanced first stage has environmental seals and swivel turret is made of Black chrome plated brass, designed ideal for technical diving. Two high pressure ports are angled ninety degrees from the regulator fitting for optimal hose routing. Five low pressure ports on a swivel turret also contribute to the most streamlined possible hose routing. The XTONE environmentally sealed to protect against internal corrosion, contaminants, and freezing. Tech Info :- Material : Black Chrome plated brass.
- Weight (DIN) : 1 lb, 15.2 oz (885 g).
- 5 LP ports (3-8/24 UN).
- 2 HP ports each angled 90° from fitting (7/16-20 UNF/ISO 263).
- First Stage Type: Diaphragm, Balanced
- Swivel 1st Stage
2ND Stage Zeepro XTEC Balance Adjustable
This regulator was designed using the Venturi Effect to direct airflow directly from the valve to the mouthpiece, resulting in the smoothest possible inhalation. An easy grip dive/pre-dive switch allows the diver to avoid a free flow at the surface and works well even with gloves. This adjustable design enables the diver to fine-tune their cracking pressure to suit their preferred breathing resistance. SPECIFICATIONS :- Reversible design, can use for right or left side model, ideal for sidemount divers and custom configurations
- Pneumatically balanced
- Adjusting the Venturi effect
- Breathing resistance adjustment knob
- Body made of a material resistant to large temperature changes
- Weight: 250g
- Ergonomically shaped mouthpiece
2ND Stage Zeepro XTX Adjustable
Zeepro XTX Second Stage regulator is suitable for use as both your primary regulator or your octopus (backup) regulator. The large venturi lever is easy to locate and use. The lever reduces the amount of grit ingress and therefore resists any possible friction giving a smooth operation.- Pneumatically-balanced second stage results in smooth, easy breathing.
- Easy-to-grip opening effort control knob keeps the diver in control.
- The comfortable mouthpiece virtually eliminates jaw fatigue.
- A heat exchanger dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water.
- Opening Effort Control Knob : Yes
- Integrated Venturi Lever : Yes
- 2nd stage only with out lp hose
Pressure Gauge Zeepro 52mm
- Tempered glass;
- All one piece brass body;
- Inner mechanism: copper beryllium coiled;
- Bourdon tube;
- Rack and pinion movement for smooth and precise operation;
- Polycarbonate transparent window;
- Plastic-rubber cover with loop for fixing.
- Standard Hose: 80 cm / 32”;
- Graduation display;
- Luminous easy to read dial design;
- Red zone from 0 to 50 BAR / 0 to 600 PSI;
- Increments 10 BAR / 100 PSI, all over the scale.
- CE TYPE spg small size, Diam. 52 mm - 2”,
- Weight: 420 gr / USA 14.81 oz:
- MADE IN ITALY
No product attachment available
No product sparepart available
