Regulator Set Zeepro XTONE Diaphragm XTEC XTX Adjustable Single Gauge 52mm

REGULATOR SET ZEEPRO XTONE DIAPHRAGM XTEC XTX ADJUSTABLE SINGLE GAUGE 52MM

1ST Stage Zeepro XTONE Diaphragm Balance 5th Port

Zeepro's XTONE the balanced first stage has environmental seals and swivel turret is made of Black chrome plated brass, designed ideal for technical diving. Two high pressure ports are angled ninety degrees from the regulator fitting for optimal hose routing. Five low pressure ports on a swivel turret also contribute to the most streamlined possible hose routing. The XTONE environmentally sealed to protect against internal corrosion, contaminants, and freezing. Tech Info :

• Material : Black Chrome plated brass.
• Weight (DIN) : 1 lb, 15.2 oz (885 g).
• 5 LP ports (3-8/24 UN).
• 2 HP ports each angled 90° from fitting (7/16-20 UNF/ISO 263).
• First Stage Type: Diaphragm, Balanced
• Swivel 1st Stage

2ND Stage Zeepro XTEC Balance Adjustable 

This regulator was designed using the Venturi Effect to direct airflow directly from the valve to the mouthpiece, resulting in the smoothest possible inhalation.  An easy grip dive/pre-dive switch allows the diver to avoid a free flow at the surface and works well even with gloves. This adjustable design enables the diver to fine-tune their cracking pressure to suit their preferred breathing resistance. SPECIFICATIONS :

• Reversible design, can use for right or left side model, ideal for sidemount divers and custom configurations
• Pneumatically balanced
• Adjusting the Venturi effect
• Breathing resistance adjustment knob
• Body made of a material resistant to large temperature changes
• Weight: 250g
• Ergonomically shaped mouthpiece

2ND Stage Zeepro XTX Adjustable

Zeepro XTX Second Stage regulator is suitable for use as both your primary regulator or your octopus (backup) regulator. The large venturi lever is easy to locate and use. The lever reduces the amount of grit ingress and therefore resists any possible friction giving a smooth operation.

• Pneumatically-balanced second stage results in smooth, easy breathing.
• Easy-to-grip opening effort control knob keeps the diver in control.
• The comfortable mouthpiece virtually eliminates jaw fatigue.
• A heat exchanger dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water.
• Opening Effort Control Knob : Yes
• Integrated Venturi Lever : Yes
• 2nd stage only with out lp hose

Pressure Gauge Zeepro 52mm

• Tempered glass;
• All one piece brass body;
• Inner mechanism: copper beryllium coiled;
• Bourdon tube;
• Rack and pinion movement for smooth and precise operation;
• Polycarbonate transparent window;
• Plastic-rubber cover with loop for fixing.
• Standard Hose: 80 cm / 32”;
• Graduation display;
• Luminous easy to read dial design;
• Red zone from 0 to 50 BAR / 0 to 600 PSI;
• Increments 10 BAR / 100 PSI, all over the scale.
• CE TYPE spg small size, Diam. 52 mm - 2”,
• Weight: 420 gr / USA 14.81 oz:
• MADE IN ITALY

No product attachment available

No product sparepart available